Back to Blog
![]() Replace all batteries or connect the AC adapter directly to the P-touch labeler.Do not use tapes that do not have the mark. Use only Brother TZ tapes with this machine to avoid damage. Replace the tape cassette if striped tape is visible, as this indicates that you have reached the end of the tape. To avoid injures, do not touch the cutter’s edge.The P-touch labeler stops while printing a label. If not, leave the tape uncut and remove the tape cassette, then wind the loose ink ribbon onto the spool as shown in the figure. If the ink ribbon is broken, replace the tape cassette.The ink ribbon is separated from the ink roller. If the print head is dirty, clean it with a cotton swab or optional print head cleaning cassette (TZe-CL4).Remove the tape cassette and reinstall it, pressing it firmly until it clicks into place.Check that the end of the tape passes through the tape guide before reinstalling the tape cassette. If the tape is jammed, remove the tape cassette and then pull out the jammed tape and cut it.If the tape is bent, cut off the bent section and thread the tape through the tape exit slot.Check that text has been entered and that the tape cassette is installed correctly with sufficient tape remaining.The label is not printed after pressing the Print key. Check that the rechargeable battery is fully charged. Check that the batteries are correctly installed and that the AC adapter designed exclusively for your P-touch labeler is correctly connected.The display remains blank after turning on the power. many frames, character sizes and styles to design beautiful custom labels. Cleaning the Tape Cutter: Tape adhesive can build up on the cutter blade after repeated use, taking the edge off the blade which may result in the tape jamming in the cutter. With your PT-80, you can create labels for any application.Clean the print head using a cotton swab or the optional print head cleaning cassette (TZe-CL4). Cleaning the Print Head: Streaks or poor quality characters on printed labels generally indicates that the print head is dirty.Use a slightly dampened cloth on difficult to remove marks. Cleaning the Unit: Wipe any dust and marks from the main unit using a soft, dry cloth. ![]() RESETTING & MAINTAINING YOUR P-TOUCH LABELER. ![]() ![]()
0 Comments
Read More
Leave a Reply. |